Table of Contents
Advertisement
Section 3 - Configuration
2.4GHz - Advanced Settings...
Security Mode
Choose None, WPA/WPA2-Personal, WPA2-Personal, WPA2/
WPA3-Personal, or WPA3-Personal. WPA3 provides the
highest level of security among these. Note that WPS will be
disabled if WPA3 is used.
802.11 Mode (2.4GHz)
Select the desired wireless networking standards to use.
The available options for the 2.4 GHz wireless network are
Mixed 802.11b/g/n, Mixed 802.11b/g, Mixed 802.11g/n,
802.11b only, 802.11g only, and 802.11n only.
Wi-Fi Channel
Select the desired channel:1-11. The default is Auto
(recommended).
Transmission Power
Select the desired wireless transmission power: High, Medium,
or Low.
Channel Width
Select Auto 20/40 MHz if you are using both 802.11n and
(2.4GHz)
non-802.11n (802.11b/g/a) devices, or select 20 MHz if you
are using a mix of 802.11b/g/a devices.
HT20/40 Coexistence
Enable or disable HT20/40 Coexistence.
(2.4GHz)
Visibility Status
The default setting is Visible. Select Invisible if you do not
want to broadcast the SSID of your wireless network.
Schedule
Select the time during which the wireless network will be
available. The schedule may be set to Always Enable or you
can add your own schedule.
To add a schedule:
Each box represents half an hour, with the clock time (0~23) at
the top of each column. To add a time period to the schedule,
simply click on the start time and drag to the end time. You
can add multiple days and multiple periods per day to the
schedule.
D-Link G416 User Manual
G416-BD3A
53
Advertisement
Table of Contents
