Ipv6 Pppoe Or Pppoe Dual Stack Connection - D-Link DSL-2750U User Manual

DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual

IPv6 PPPoE or PPPoE Dual Stack Connection

In the Connection name field, specify a name for the connection for easier identification.
For ADSL WAN connection, fill in the VPI and VCI fields.
In the Username field, enter your login, and in the Password and Password confirmation
fields – the password provided by your ISP.
If you need to specify the gateway address manually, deselect the SLAAC checkbox and fill in the
Static IPv6 gateway address field.
As a rule, the specified settings are enough to configure a connection of the selected type. If you
need to specify additional settings, open the expert settings mode.
bottom left corner of the page (for a detailed description of all the connection's parameters, see the
Creating ADSL WAN Connection section, page 72 when creating ADSL WAN connection or the
Creating Ethernet WAN Connection section, page 80 when creating Ethernet WAN connection).
Click the Next button to continue.
After that the page displaying all specified settings opens. Click the Apply button to create the
connection or the Back button to specify other settings.
After clicking the Apply button, the page for checking the Internet availability opens (see the
Checking Internet Availability section, page 55).
Figure 29. Configuring IPv6 PPPoE WAN connection.
Page 47 of 181
Configuring via Web-based Interface
To do this, use the switch in the