Table of Contents
Advertisement
Figure 35. Installing the fan
Steps
1. Place the system fan on the palm-rest and keyboard assembly.
2. Align the screw holes on the system fan with the screw holes on the palm-rest and keyboard assembly.
3. Replace the two screws (M2x4) that secure the fan to the palm-rest and keyboard assembly.
4. Connect the fan cable (FN1) to the system board.
Next steps
1. Install the
base cover for computer shipped with an aluminum
chassis.
2. Follow the procedure in
After working inside your
computer.
Removing and installing Customer Replaceable Units (CRUs)
61
Advertisement
Table of Contents
