Yamaha DSP-A5 Owner's Manual page 13

Connecting an Audio Component
Be sure to connect the right channel (R), left channel (L),
input (IN) and output (OUT) properly.
Turntable
OUTPUT GND LINE OUT
L R
L R L R
OUTPUT OUTPUT
CD player
Tuner
Tape deck or
MD recorder
LINE IN
L R L R
(Europe model)
L
R
PHONO terminals
These terminals are used to connect a turntable with an MM
or high-output MC cartridge. If you have a turntable with a
low-output MC cartridge, use an inline boosting transformer
or MC head amplifier when connecting to these terminals.
y
Connecting the ground (earth) wire of the turntable to the GND
terminal will normally minimize hum, but in some cases, better
results may be obtained with the ground wire disconnected.
CONNECTIONS
Analog signal
Signal flow
11