Dell Inspiron 7700-2055 Service Manual page 31

Steps
1. Align the notch on the solid-state drive with the tab on the M.2 card slot.
2. Slide the solid-state drive into the M.2 card slot on the system board.
3. Replace the screw (M2x2.5) that secures the solid-state drive to the system board.
Next steps
1. Install the system-board
2. Install the stand.
3. Install the bottom cover.
4. Install the back cover.
5. Follow the procedure in
shield.
After working inside your computer.
Removing and installing components 31