Page 2
For more information relating to the RMT-1200, see the Wireless Module Application Sheet Wireless RAK Application Sheet, Wireless Device LED Diagnostics For programming a wireless system, including the device in this manual: Wireless Module Programming Guide Contents What is the RMT1200?
Page 3
● Modules should be mounted vertically, with the terminals at the bottom. ● Ensure that cable clamps are securely fitted on the supply and load cables. ● While the modules are designed to be completely maintenance-free, they should be mounted in an accessible location should investigation or re-addressing of the units be necessary.
Page 4
The LED on the circuit board flashes four times when the module receives any Rako wireless message and is a useful diagnostic indicator. This function becomes inactive after 20 minutes to avoid a nuisance light spill but can be re-activated by pressing the setup button.