Advertisement
● Modules should be mounted vertically, with the terminals at the bottom.
● Ensure that cable clamps are securely fitted on the supply and load cables.
● While the modules are designed to be completely maintenance-free, they should be
mounted in an accessible location should investigation or re-addressing of the units
be necessary.
STEP 1:
STEP 2:
STEP 3:
STEP 4:
RMT1200
Remove the cover by
removing the two screws at
the bottom of the unit,
pulling the bottom of the
cover away from the
bottom, and lifting it up.
Insert the supply IN
conductors as well as the
load OUT conductors.
Fit the supplied cable
clamps and ensure the
cable is unable to move.
Replace the cover and
replace the screws.
Manual Version 2.0.0
Advertisement
