Advertisement
Quick Links
Advertisement
Related Manuals for rako RLED20+CC4
Summary of Contents for rako RLED20+CC4
- Page 1 Instruction Manual RLED20+CC4 4 Channel Constant Current LED Dimmer Module 2024 Version 2.0.0...
- Page 2 Appendix 1: Example wiring diagram Appendix 2: LED Diagnostics 1 What is the RLED20+CC4? ● The RLED20+CC4 is a Constant Current LED dimmer with four outputs designed for controlling four independent Constant Current loads. ● Offering various output options, the RLED20+CC4 supports 350mA, 500mA, and 700mA loads.
- Page 3 DO NOT CONNECT DIRECTLY TO THE MAINS SUPPLY. ● All LED fittings should be wired in series. ● RLED20+CC4 modules should be mounted in areas that are adequately ventilated, dry, and outside of any enclosed metal casings that may interfere with the Wireless signal.
- Page 4 Ensure that the connected load is wired in series, as parallel wiring will cause damage to the RLED20+CC4 and the load. STEP 5 Fix the cable clamps over the cables to secure them in place, and replace the cover.
- Page 5 5 Programming the RLED20+CC4 Once the RLED20+CC4 has powered up and has been tested working with the setup button, the device is ready to be programmed. For instructions on how to program the RLED20+CC4, see the Wireless Module Setup Guide.
- Page 6 When the unit is out of range, there will be intermittent pulses on the LED when any Wireless message is sent. It is recommended to install a Wireless repeater (WRB-100) if you are experiencing intermittent Wireless range. RLED20+CC4 Manual Version 2.0.0...
Need help?
Do you have a question about the RLED20+CC4 and is the answer not in the manual?
Questions and answers