Related Manuals for rako RLED30CV4+
Summary of Contents for rako RLED30CV4+
- Page 1 Instruction Manual RLED30CV4+ 4-Channel Constant Voltage Dimmer 2024 Version 2.0.0...
-
Page 2: Table Of Contents
LED tape. There are four modes of operation: ● 4 Rako Channels RGBW ● 1 Rako Channel RGBW* ● 1 Rako Channel RGB* ● 1 Rako Channel Colour Tunable* *Requires latest version of Rasoft Pro 2 Loadings Voltage... -
Page 3: Installation
3 Installation Installation should only be carried out by a competent electrician. DO NOT CONNECT DIRECTLY TO THE MAINS SUPPLY. ● RLED30CV4+ modules should be mounted in areas that are adequately ventilated, dry, and outside of any enclosed metal casings that may interfere with the Wireless signal. -
Page 4: Initial Checks
● The internal LED behind the clear button will flicker when the module receives any Rako Wireless message and is a useful diagnostic indicator. The LED feedback becomes inactive after 20 minutes to avoid a nuisance light spill but can be re-activated by pressing the clear button. -
Page 5: Adding The Rled30Cv4+ Into Rasoft
5.1 Adding the RLED30CV4+ into Rasoft 1. In Rasoft Pro, go to File > New Device 2. A device menu will pop up, select the RLED30CV4+ and select ‘Next’ 3. Assign the RLED30CV4+ to the desired Room and Channel, and select ‘Next’ For more than one Channel, select the first Channel, subsequent Channels will automatically be assigned. -
Page 6: Output Types
The RLED30CV4+ can be configured in different ways depending on the load type, there are four options in Rasoft Pro. 1. RGBW (4 Channels) - Four controllable Rako Channels in the Room Editor and the App. RGBW 4 Channel Mode 2. -
Page 7: Setting The Device Output
3. RGB (1 Channel) - Similar to the RGBW single Channel output, only omitting white. RGB 1 Channel Mode 4. Colour Tunable (1 Channel) - Used when there are two temperatures of LED load, controllable via the Colour Tunable icon to the right of the Channel name, as well as in the App. -
Page 8: Appendix 1: Led Diagnostics
6 Appendix 1: LED Diagnostics Wireless Range LED Pulses Description Good Wireless reception When the unit is receiving successfully, there will be four rapid pulses on the LED when any Wireless message is sent. Bad Wireless reception When the unit is out of range, there will be intermittent pulses on the LED when any Wireless...