Page 1
Instruction Manual RMT-500 500W Trailing Edge Wireless Dimmer 2024 Version 2.0.0 RMT-500 Manual Version 2.0.0...
Page 2
LEDs as well as tungsten and incandescent lamps. ● The RMT-500 dimmer modules are not suitable for inductive loads such as wire-wound transformers or electric motors. ● The RMT-500 can be controlled by any Rako device that transmits wireless messages. Loadings Minimum...
Page 3
Remove the cover and cable clamp STEP 1: Insert the supply IN conductors as well as the STEP 2: load OUT conductors. Replace the cable clamp, ensuring the cables fit securely underneath STEP 3: Replace the cover STEP 4: RMT-500 Manual Version 2.0.0...
Page 4
Programming the RMT-500 Once the RMT-500 has powered up and has been tested working with the setup button, the device is ready to be programmed. For instructions on how to program the RMT-500, see the Wireless Module Setup Guide.