Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for rako RML-1200
Summary of Contents for rako RML-1200
- Page 1 Instruction Manual RML-1200 1200W Leading Edge Wireless Dimmer 2024 Version 2.0.0...
- Page 2 Programming the RML-1200 Appendix 1: LED Diagnostics What is the RML-1200? Rako RML-1200 modules are digital leading edge dimmers suitable for use with mains voltage tungsten lighting and low voltage tungsten with leading edge dimmable transformers. RML1200s are inductive dimmers, and are not generally recommended for use with mains dimmable LEDs.
- Page 3 Installation of the RML-1200 Installation should only be carried out by a competent electrician. ● RML1200 modules should be mounted in areas that are adequately ventilated, dry, and outside of any metal enclosed casings that may interfere with the wireless signal.
- Page 4 The clear button can be used as a manual on/off switch to test the circuit. The internal LED behind the clear button will flicker when the module receives ANY Rako wireless message and is a useful diagnostic indicator. This function becomes inactive after 20 minutes to avoid a nuisance light spill but can be re-activated by pressing the clear button.
- Page 5 Programming the RML-1200 Once the RML-1200 has powered up and has been tested working with the setup button, the device is ready to be programmed. For instructions on how to program the RML-1200, see the Wireless Module Setup Guide. Appendix 1: LED Diagnostics...
Need help?
Do you have a question about the RML-1200 and is the answer not in the manual?
Questions and answers