Table of Contents
Advertisement
Notes on input mode selection
•
To play back a source with the Dolby Digital (AC-3) decoded, set
the input mode to "AUTO".
•
When you want to enjoy a source which has normal 2-channel
signals with a Dolby Pro Logic Surround program, select the
ANALOG mode.
•
In the AUTO mode, there may be a case depending on some LD
players or DVD players that when you make a search on a source
encoded with the Dolby Digital (AC-3) during the play and then
the play is restored, sound output is interrupted for a moment
because the digital input signal is selected again.
40
RECORDING A SOURCE TO
AUDIO/VIDEO TAPE (OR DUBBING
FROM A TAPE TO ANOTHER)
NOTE: If you will use the remote control unit, be sure to use it with
the lid open.
1. Set the REC OUT selector to the SOURCE position.
Front panel
DVD/LD
TV/DBS
VCR 1
VCR 2
VIDEO AUX
REC OUT
2. Select the source you want to record.
Front panel
VCR 1
DVD/LD
TAPE (MD)
TV/DBS
3. Play the source and increase the setting of the master VOLUME
control to confirm it.
Front panel
VOLUME
l6
20
l2
28
8
4
40
60
2
0
–dB
4. Set the tape deck, MD recorder or VCR used for recording to the
recording mode.
SOURCE
TAPE (MD)
TUNER
CD
PHONO
Remote control
DVD/LD
or
Remote control
MASTER VOLUME
or
MUTE
Hide quick links:
Advertisement
Table of Contents
