SELECTING SOUND FIELD PROGRAMS
This unit has 10 programs for digital sound field processing, 6
from actual acoustic environments from around the world, and 4
programs for Audio/Video sources including sources encoded with
Dolby Pro Logic surround or Dolby Digital (AC-3).
When operating on the front panel:
1. If no program name is illuminated on the display panel, press the
EFFECT switch to turn on the digital sound field processor so that a
name of sound field program lights up on the display panel and the
2. Select the desired sound field program by pressing the
* The name of selected program lights up on the display panel
and the monitor screen.
When operating on the remote control unit:
Simply pressing a DSP program selector key turns on the digital
sound field processor and select the corresponding program directly.
PRO LOGIC ENHANCED
DIGITAL PCM AC–3
DIGITAL PCM AC–3
JAZZ CLUB CHURCH
To enjoy a video source with the Dolby Pro Logic
Surround or Dolby Digital (AC-3) decoded
When you select the program No. 1, 2 or 3, and the input signal
of the source is 2-channel stereo, Dolby Pro Logic Surround is
decoded. When some program is selected and the input signal of the
source is encoded with the Dolby Digital (AC-3), Dolby Digital (AC-3)
is automatically decoded.
* The following indicators on the display panel show you what sound
processing is being made.
Lights up when the Dolby Digital (AC-3) is being decoded and the
signals of selected source encoded with the Dolby Digital (AC-3) is
not in 2-channels.
Lights up when the Digital Sound Field Processing is being made
Lights up when the Dolby Pro Logic Surround is being decoded
* In addition, for the program No. 1, 2 and 3, the name of the program
on the display panel or the monitor screen will change according to
the type of decoding. (See pages 44–45 for details.)
NOTE: If the input signals of source encoded with the Dolby Digital
(AC-3) are in 2-channels only, the sound processing for them is
similar to that for analog or PCM audio signals.