Yamaha DSP-A1092 Owner's Manual page 50

Natural sound av amplifier
Hide thumbs Also See for DSP-A1092:
Table of Contents

Advertisement

Adjusting delay time
You can adjust the time difference between the beginning of the
sound from the main speakers and the beginning of the effect
sound from the rear or front effect speakers.
The larger the value, the later the effect sound is generated.
This adjustment can be made to all programs individually.
Program
1. DOLBY PRO LOGIC
DOLBY DIGITAL
2. PRO LOGIC ENHANCED
DOLBY DIGITAL ENHANCED
3. MOVIE THEATER
DIGITAL MOVIE THEATER
4. TV SPORTS
5. STADIUM
6. DISCO
7. ROCK CONCERT
8. JAZZ CLUB
9. CHURCH
10. CONCERT HALL
NOTES
Adding too much delay will cause an unnatural effect with some
sources.
When the –/+ button is pressed, sound is momentarily
interrupted.
48
Control range (ms)
15 to 30
0 to 15
15 to 30
0 to 15
15 to 30
1 to 50
1 to 50
1 to 50
1 to 50
1 to 50
1 to 50
1 to 50
1 to 50
Adjusting output level of the front effect, center,
right rear and left rear speakers, and subwoofer
If desired, you can adjust the sound output level of the each
speaker even if the output level is already set in "SPEAKER
BALANCE ADJUSTMENT" on pages 33 to 34.
Speakers
Control range (dB)
FRONT
MIN, –20 to +10
CENTER
MIN, –20 to +10
RIGHT SURROUND
MIN, –20 to +10
LEFT SURROUND
MIN, –20 to +10
SUBWOOFER
MIN, –20 to 0
NOTES
Output level of the front effect speakers cannot be adjusted
when the program DOLBY PRO LOGIC (DOLBY DIGITAL) is
selected.
Output level of the center speaker cannot be adjusted when the
program STADIUM, DISCO, ROCK CONCERT, JAZZ CLUB,
CHURCH or CONCERT HALL is selected, and the input signal
is analog, PCM audio or encoded with the Dolby Digital (AC-3)
in 2-channels.
Once the output level is adjusted, the level value will be the
same in all the digital sound field programs.
NOTE
The values of the delay time and each speaker level you set the
last time will remain memorized even when the power of this unit is
off.
However, if the power cord is kept disconnected for more than one
week, these values will be automatically changed back to the
original factory settings.
Preset value
0
0
0
0
0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents