Connection Of Monitor And Mouse - Panasonic LP-RH Series Setup And Maintenance Manual

2-6-6 Connection of Monitor and Mouse

This product can be used for monitoring and setting during operation by connecting a commercially available monitor and
mouse. The monitor and mouse are available when the optional expansion board is installed to the controller. Refer to "2-5
Expansion board installation" (P.55).
„ Available monitor and USB mouse
Use a monitor and mouse that meet the following specifications.
Item
Monitor resolution
Monitor input terminal
Mouse
• When using the monitor and mouse, check the operation in advance. We do not guarantee the operation of all VGA
monitors and USB mouses.
• Do not connect or disconnect the monitor while the power is on.
• The USB hub cannot be used.
„ Connection procedure
1.
Turn off the key switch of the controller.
• Do not connect or disconnect the monitor and mouse while the laser marker is powered on.
2.
Connect the monitor and mouse to the following connector on the back of the controller.
No. Connected device
Monitor
q
Mouse
w
• USB connector A has one port on the front and two ports on the rear of the controller. A USB mouse can be connected
to either port.
66
Contents
1280 × 1024 or 1440 × 900
VGA terminal (D-sub15 pin)
Human interface device (HID) class USB mouse
q
Connector
VGA connector
USB port A
ME-LPRH-SM-3
w