Advertisement
EN 32
5.
Q522.3E LA
5.9.4
Content and Usage of the One-Zip Software File
Below you find a content explanation of the One-Zip file
(content may vary per chassis), and instructions on how and
when to use it.
•
1.1 Ambilight_PRFAM_x.x.x.x.zip. Not to be used by
Service technicians.
•
1.2 Cabinet_ACOUS_x.x.x.x.zip. Not to be used by
Service technicians.
•
1.3 Ceisp2padll_P2PAD_x.x.x.x.zip. Not to be used by
Service technicians. For ComPair development only.
•
1.4 Display_DISPT_x.x.x.x.zip. Not to be used by Service
technicians.
•
1.5 EDID_Q522E_x.x.x.x.zip. Contains the EDID content
of the different EDID NVMs. See ComPair for further
instructions.
For sets with three HDMI connectors.
- For HDMI 1 NVM, use "*port 1*.bin
- For HDMI 2 NVM, use "*port 2*.bin
- For HDMI 3 NVM, use "*port 3*.bin
•
1.6 EJTAGDownload_Q522X_x.x.x.x.zip. Only used by
service centres which are allowed to do component level
repair.
•
1.7 Factory_Q522X_x.x.x.x_commercial.zip. Only for
production purposes, not to be used by Service
technicians.
•
1.8 FlashUtils_Q522X_x.x.x.x_commercial.zip. Not to
be used by Service technicians.
•
1.9 FUS_Q522X_x.x.x.x_commercial.zip. Contains the
"autorun.upg" which is needed to upgrade the TV main
software and the software download application.
•
2.0 MOP_IACXX_x.x.x.x.zip. Not to be used by Service
technicians. A programmed MOP device can be ordered
via your regional Service organization.
•
2.1 OpenSourceFile_Q522X_x.x.x.x.zip. Not to be used
by Service technicians.
•
2.2 Pacific3_P3FW0_x.x.x.x.zip. Not to be used by
Service technicians. A programmed PACIFIC device can
be ordered via your regional Service organization.
•
2.3 PQPrivate_U5207_x.x.x.x.zip. Not to be used by
Service technicians.
•
2.4 PQPublic_U5207_x.x.x.x.zip. Not to be used by
Service technicians.
•
2.5 Processor_NVM_SW_Q522_x.x.x.x.zip. Default
NVM content. Must be programmed via ComPair.
•
2.6 StandbySW_CFTxx_x.x.x.x_commercial.zip.
Contains the Stand-by software in "upg" and "hex" format.
- The "StandbySW_xxxxx_prod.upg" file can be used to
upgrade the Stand-by software via USB.
- The "StandbySW_xxxxx.hex" file can be used to upgrade
the Stand-by software via ComPair.
-The files "StandbySW_xxxxx_exhex.hex" and
"StandbySW_xxxxx_dev.upg" may not be used by Service
technicians (only for development purposes).
•
2.7 UpgradeAll_Q531X_x.x.x.x_commercial.zip. Only
for production purposes, not to be used by Service
technicians.
Caution: Never use this file, because it will overwrite
the HDCP keys ! ! !
Service Modes, Error Codes, and Fault Finding
Advertisement
