Download Print this page

Philips 22PFL6403D Service Manual page 15

Chassis q522.3e

Advertisement

Service Modes, Error Codes, and Fault Finding
parental rating status is indicating a higher age then the
parental rating lock as set by the customer, you will need to
enter the child lock code.
TV Ratings Lock. Only applicable for US.
Movie Ratings Lock. Only applicable for US.
On timer. Indicates if the "On timer" is set "ON" or "OFF"
and when it is set to "ON", also start time, start day and
program number is displayed. See DFU on how to change
this item.
Location. Gives the last status of the location setting as
set via the installation menu. Possible values are "SHOP"
and "HOME". If the location is set to "SHOP", several
settings are fixed. So for a customer location must be set
to "HOME". Can be changed via the installation menu (see
also DFU).
HDMI Key Validity. Indicates if the HDMI keys (or HDCP
keys) are valid or not. In case these keys are not valid and
the customer wants to make use of the HDMI functionality,
the SSB has to be replaced.
Tuner Frequency. Indicates the frequency the transmitter
is tuned to.
TV System. Gives information about the video system of
the selected transmitter. In case a DVBT signal is received
this item will also show ATSC.
BG: PAL BG signal received
DK: PAL DK signal received
L/La: SECAM L/La signal received
I: PAL I signal received
M: NTSC M signal received
ATSC: ATSC signal received
DVB: DVBT signal received
12NC One Zip SW. Displays the 12NC number of the one-
zip file as it is used for programming software in production.
In this one-zip file all below software versions can be found.
Initial Main SW. Displays the main software version which
was initially loaded by the factory.
Current Main SW. Displays the built-in main software
version. In case of field problems related to software,
software can be upgraded. As this software is consumer
upgradeable, it will also be published on the Internet.
Example: Q522E_1.2.3.4.
Flash Utils SW. Displays the software version of the
software which contains all necessary components of the
download application. To program this software, EJTAG
tooling is needed. Example: Q522E_1.2.3.4.
Stand-by SW. Displays the built-in stand-by processor
software version. Upgrading this software will be possible
via ComPair or via USB (see chapter Software upgrade).
Example: STDBY_3.0.1.2.
MOP SW. Only applicable for US. At the time of release of
this manual, there was still a problem with this item, and
some incorrect data was displayed. Ignore this.
Pacific 3 Flash SW (if applicable). Displays the Pacific 3
software version.
NVM Version. Displays the NVM version as programmed
by factory.
Display Parameters. for development purposes only.
Private PQ Parameters. for development purposes only.
Public PQ Parameters. for development purposes only.
Ambilight Parameters. for development purposes only.
Acoustics Parameters. for development purposes only.
DFI Software (if applicable). Displays the DFI EPLD
software.
DFI Ambilight software (if applicable). Displays the DFI
ambilight EPLD software.
How to Exit CSM
Press "MENU" on the RC-transmitter.
Q522.3E LA
5.
EN 15

Advertisement

loading