QuietCool AFG PRO-2.0 Owner's Manual page 9

4. In the junction box, with a wire nut, tie the white common wires together. Using the green ground
screw, ground the green wire from the fan and the 2 wire Romex from the thermostat, to the junction
box.
5. High Speed: Tie the black wire from the fan to the taped white wire from the thermostat
(see Figure 3.2A)
Low Speed: Tie the red wire from the fan to the taped white wire from the thermostat
(see Figure 3.2B)
6. Tie the black wire from the power source to the black wire from the thermostat. Replace the cover
on the junction box.
7. In the thermostat, tie the black wire to one of the black wires from the thermostat. Tie the taped
wire to the other black wire from the thermostat. Using the ground screw in the thermostat, ground
the ground wire from the 2 wire Romex.
8. Tie the two remaining black wires together. Then, tie the remaining copper wires together.
Figure 3.2A
Specialty Series Fan
Figure 3.2B
Specialty Series Fan
QUIETCOOLSYSTEMS.COM
Ground the fan to the junction box
using the green ground screw
Junction
Box
14-2 Wire
2 Wire Romex
Power Source
Ground the fan to the junction box
using the green ground screw
Junction
Box
14-2 Wire
2 Wire Romex
Power Source
Thermostat
Thermostat
9