Advertisement
Turning the Calculator On and Off
Each timeyou turn the TI-95on, it performs a self-test to
checkfor any changesin the contentsof the memory since
thelasttimeit was turnedoff. The information displayed
dependson the results of this test.
Initial Display
at Power Up
Press the
key to turn thecalculator on. Adjust the
displaycontrast control on the rightside of the
calculator as needed.
Whenthecalculatoris first turnedon, a self-test is
automatically performedto check thecontents of the
memory.If you haveinstalled batteries just prior to
turningthe calculatoron,the following messageis
displayed.
This message means theself-test has detected a
complete loss of memory. The memory has been cleared
andall parameters have beenresetto their default
settings.
Referto ''System ParameterSettings"' in Appendix A for
alist of system parameters andtheeffects of pressing
the
key orallowing the batteriesto discharge.
If the memory has not beencleared, buttheself-test
detects a changein the memory contents, the message
belowis displayed. You should check anyvalues stored
in the calculator memoriesandverify any stored
program instructions. This message is also displayed if
youpress the
key while the calculatoris on.
If either of these messagesis displayed, youcan still
perform any calculator operations.
1-4
Getting Started
Advertisement
