Advertisement
Error Messages(Continued)
Error Message
Possible Cause
INVALID REGISTER(9)
a. Attempted to address a data memory
outsidethe currentpartitioning
b. Attempted to PUT or WRT datafile
largerthan the current data memory
partitioning
¢. Mostsignificantdigit of a four-digit
register addressis not 0, 2, 3, or 6
d. Attempted to access a system register
outside the range 0-139
e. Specified the last userregister or
system registers 0-16 for CIO
f. Attempted STA or RCA within the
last nineuserregisters or within the
first 16 or last nine system registers
INVALID SEQUENCE(6)
a. Attempted SBA 5— outside a library
cartridge
b. Attempted RCB with an address in
the system ROM
c. Attempted to use flag greater than
15 outside a program or system mode
1/O ERROR nnn(4)
Return status from CIO is not 0. Actual
status returnedis nnn.
LABEL NOT FOUND(11)
Addresseda label that doesnotexist in
current program (can be file or program
memory)
MOREDATAIN PGM(21)
File on tape verified correctly, but there
was moredata in program memory after
verified amount
NO DATA FOUND (5)
Attempted to store an empty program
file to directory or tape
B-8
In CaseofDifficulty
Advertisement
