Advertisement
Printing the
Calculator
Status
To print the currentstatus of the calculator, press
<sT>.
Thecalculator prints the currentpartition settings and
each parameterthatis not currently set to its default
setting. (Parameters thatare currently set to their
defaultsettings are not printed.)
For example, if you are usingthe default partitioning
and haveselected the radians angle mode, the printed
result is similar to the following.
P1000 R125, F5200
ANGLE MODE = RAD
FLAGS SET = NONE
MODULE = NONE
LAST ERROR=NONE
Refer to Chapter5, ''Listing the CalculatorStatus," for a
completelist of the available statuses.
(continued)
Using an Optional Printer
6-9
Advertisement
