Advertisement
OPERATION
Before first use
Remove any packaging material, labels or stickers before first use. Clean all the parts and
accessories except the motor base in warm, soapy water. Dry thoroughly.
Note: Care should always be taken when cleaning the blades.
Blending
1.
Place the Blender on the Motor Unit in the unlock position and
rotate clockwise until the Blender locks into position on the
motor base. If the blender is not locked in place, the blender
will not work.
2.
Peel and core fruits or vegetables and then cut them into small
cubes approximately 1cm in size.
3.
Place the prepared food pieces into the Blender. Ensure that
the mixture does not exceed the maximum level indicated on
the blending jar. Note: Adding purified water ensures the
appliance operates smoothly
Notes:
Never use boiling liquids or run the appliance empty.
Do not use the Blender for blending meat.
4.
Place the lid on the blender and ensure that it is securely attached.
5.
During operation, you can add ingredients through the central opening of the lid.
6.
Connect the plug to the electrical outlet and set the speed selector knob to your
desired speed. There are four settings: P, 0, 1, 2:
o
0 - off
o
1 - low speed
o
2 - high speed
o
P - pulse
7.
Turn the speed selector knob to the 0 position once the mixture has reached your
desired consistency. Note: The total operating time should not exceed 1 minute.
After one cycle allow the motor to rest for 1 minute. If the desired consistency is not
reached, you can blend more than once.
Advertisement
