Advertisement
CLEANING & CARE
Blender
1.
Disconnect the power supply before cleaning.
2.
Pour a little warm water into the bowl, turn and hold the speed selector to the P
position for a few seconds.
3.
Remove the bowl and rinse it under running water. Remove the Bowl Cover and
Measuring Cup, then immerse the Top Lid and Measuring Cup in water and clean
them with a soft brush. Finally, clean them with a damp cloth. Caution: The blade
base can be disassembled for cleaning.
4.
Wipe the outside of the base with a damp cloth. Never immerse it in water, as
electric shock is possible to occur. Then dry it thoroughly. Ensure the interlock area
is free of food particles.
Food Processor
1.
Disconnect the power supply before cleaning.
2.
Empty the processing bowl, dismantle all detachable parts, and rinse them in
warm soapy water. Exercise extreme caution when handling the blade as it is very
sharp. All accessories, except for the motor base, are dishwasher-safe
components, but the temperature setting should not exceed 70°C. Then, dry them
thoroughly.
3.
Wipe the exterior of the base with a damp cloth. Never immerse it in water, as
electric shock is possible. Then, dry it thoroughly. Ensure the interlock area is free of
any food particles.
Kneading and Mixing
1.
Disconnect the power supply before cleaning.
2.
Empty the bowl and remove the lid, the plastic blade, and pusher. Immerse them
in water and clean with a damp cloth or soft brush.
3.
Wipe the exterior of the base with a damp cloth. Never immerse the motor base in
water, as electric shock is possible. Then, dry it thoroughly. Ensure the interlock
area is free of any food particles.
Advertisement
