Advertisement
Whisk
1.
Disconnect the power supply before cleaning.
2.
Empty the bowl and remove the lid, the whisk, and pusher. Immerse them in water
and clean with a damp cloth or soft brush.
3.
Wipe the exterior of the base with a damp cloth. Never immerse the motor base in
water, as electric shock is possible. Then, dry it thoroughly. Ensure the interlock
area is free of any food particles.
Slicing/Julienning/Shredding
1.
Disconnect the power supply before cleaning.
2.
Empty the bowl and remove the disk stand from the bowl. Then, remove the
shredding/slicing/julienne blade from the disk stand, the pusher from the lid, and
the lid from the bowl. Immerse the lid, pusher, bowl, disk stand, and the
shredding/slicing/julienne blade in water and clean them with a soft brush.
Exercise extreme caution when handling the blades as they are very sharp.
Note:
For disassembling the disks from the disk stand, first push out one side with no block,
then push out the other side. For assembling, first push in the no block side, then push
in the other side.
4.
Wipe the exterior of the base with a cloth. Never immerse it in water, as electric
shock is possible. Then, dry it thoroughly. Ensure the interlock area is free of any
food particles.
Note:
Some foods may discolour the disk stand. This is normal and will not harm the plastic
or effect the flavour of food. Rub with cloth dipped with vegetable oil to remove
discoloration.
This marking indicates that this appliance should not be disposed with
other household wastes. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources.
Advertisement
