Table of Contents
Advertisement
Security Function Ver. 1.01 Feb. 2017
• When "ON" is set for Enhanced Security Mode, the machine is set into an access
lock state if a wrong CE password is entered a predetermined number of times.
Then, access to the Service Mode cannot be made until the access lock state is
released.
For the procedure to release the access lock state, see P.11.
5. Type the password to be newly used from the keyboard shown on the display and touch
[END].
NOTE
• When [Password Rules] is set to "Enable" for [Administrator Settings] → [Security
Settings] → [Security Details], the machine does not accept any new password
that contains only the same character or that is the same as the previous pass-
word.
Also, when the number of password characters is lower than the minimum number
of characters (initial value: 12 characters) as set out under [Set Minimum Pass-
word Length] in the [Password Rules], a new password will not be able to be set.
• The CE password should be set at a value which is not the initial value and which
is difficult to guess.
• Quitting the Service Mode after the new password has been set will validate the
setting of the new password.
26
8. Service Mode functions
A9HJS1E006DA
Advertisement
Table of Contents
