Table of Contents
Advertisement
Tips for Missing Running Dynamics Data
If running dynamics data does not appear, you can try these tips.
• Make sure you have a running dynamics accessory, such as the HRM-Pro accessory.
Accessories with running dynamics have
• Pair the running dynamics accessory with your watch again, according to the instructions.
• If you are using the HRM-Pro accessory, pair it with your watch using ANT+ technology, rather than Bluetooth
technology.
• If the running dynamics data display shows only zeros, make sure the accessory is worn right-side up.
NOTE: Ground contact time and balance appears only while running. It is not calculated while walking.
Using the Varia Camera Controls
Some jurisdictions may prohibit or regulate the recording of video, audio, or photographs, or may require that
all parties have knowledge of the recording and provide consent. It is your responsibility to know and follow all
laws, regulations, and any other restrictions in jurisdictions where you plan to use this device.
Before you can use the Varia camera controls, you must pair the accessory with your watch
Wireless Sensors,
page 92).
1 Add the RCT Camera glance to your watch
2 From the RCT Camera glance, select an option:
• Select
to view the camera settings.
• Select
to take a photo.
• Select
to save a clip.
inReach Remote
The inReach remote function allows you to control your inReach device using your tactix device. Go to
.garmin.com
to purchase a compatible inReach device.
Using the inReach Remote
Before you can use the inReach remote function, you must add the inReach glance to the glance loop
(Customizing the Glance Loop,
1 Turn on the inReach device.
2 On your tactix watch, press UP or DOWN from the watch face to view the inReach glance.
3 Press START to search for your inReach device.
4 Press START to pair your inReach device.
5 Press START, and select an option:
• To send an SOS message, select Initiate SOS.
NOTE: You should only use the SOS function in a real emergency situation.
• To send a text message, select Messages > New Message, select the message contacts, and enter the
message text or select a quick text option.
• To send a preset message, select Send Preset, and select a message from the list.
• To view the timer and distance traveled during an activity, select Tracking.
VIRB Remote
The VIRB remote function allows you to control your VIRB action camera using your device.
94
on the front of the module.
NOTICE
(Glances,
page 62).
page 59).
(Pairing Your
buy
Sensors and Accessories
Advertisement
Table of Contents
