Using The Led Flashlight; Garmin Pay; Setting Up Your Garmin Pay Wallet; Paying For A Purchase Using Your Watch - Garmin Tactix 7 Pro Owner's Manual

Using the LED Flashlight

This device may have a flashlight that can be programmed to flash at various intervals. Consult your physician if
you have epilepsy or are sensitive to bright or flashing lights.
Using the flashlight can reduce battery life. You can reduce the brightness to extend the life of the battery.
1 Hold LIGHT.
2 Select .
3 If necessary, press START to turn on the flashlight.
4 Select an option:
• To adjust the brightness or color of the flashlight, press UP or DOWN.
TIP: You can quickly press LIGHT twice to turn on the flashlight at this setting in the future.
• To program the flashlight to flash in a selected pattern, hold MENU, select Strobe, select a mode, and
press START.
• To display your emergency contact information and program the flashlight to flash in a distress pattern,
hold MENU, select Distress Pattern, and press START.
NOTE: Your emergency contact information will only appear if it has been configured in the Garmin
Connect app.
Garmin Pay
The Garmin Pay feature allows you to use your watch to pay for purchases in participating locations using credit
or debit cards from a participating financial institution.
Setting Up Your Garmin Pay Wallet
You can add one or more participating credit or debit cards to your Garmin Pay wallet. Go to
/garminpay/banks to find participating financial institutions.
1 From the Garmin Connect app, select
2 Select Garmin Pay > Get Started.
3 Follow the on-screen instructions.

Paying for a Purchase Using Your Watch

Before you can use your watch to pay for purchases, you must set up at least one payment card.
You can use your watch to pay for purchases in a participating location.
1 Hold LIGHT.
2 Select .
3 Enter your four-digit passcode.
NOTE: If you enter your passcode incorrectly three times, your wallet locks, and you must reset your
passcode in the Garmin Connect app.
Your most recently used payment card appears.
4 If you have added multiple cards to your Garmin Pay wallet, swipe to change to another card (optional).
5 If you have added multiple cards to your Garmin Pay wallet, select DOWN to change to another card
(optional).
6 Within 60 seconds, hold your watch near the payment reader, with the watch facing the reader.
The watch vibrates and displays a check mark when it is finished communicating with the reader.
7 If necessary, follow the instructions on the card reader to complete the transaction.
TIP: After you successfully enter your passcode, you can make payments without a passcode for 24 hours while
you continue to wear your watch. If you remove the watch from your wrist or disable heart rate monitoring, you
must enter the passcode again before making a payment.
Appearance
WARNING
or .
garmin.com
83