Sony RSE-500 Operating Instructions Manual page 49

CAL site icons
O
EADSET
Each time you select ENTER, the headset
or line volume setting of the local site is
changed.
For details, see "Changing the Headset and
Line Volume of the Local Site" on page 3-4
(ENl
«««*««««
P I/O
CONTROL
Sets the bit value of the local RELAY
OUT port.
For details, see "Setting the Bit Value of the
RELAY OUT Port" on the page 3-9 (EN).
information
Selects the information to display or not.
For details, see "Selecting the Information to
Display on the Monitor" on page 3-7 (EN).
Each time you select ENTER, the
microphone input level setting of the local
site is changed.
For details, .see "Changing the Input Level of
the Microphone of the Local Site " on page 3-
4 (EN).
Each time you select ENTER, the inset
window setting is changed.
For details, see "Changing the Position of the
Inset Window (Picture-in-Picture)" on page
3-7 (EN).
BUSY
Makes the line busy temporarily.
For details, see "Making the Line Busy
Temporarily" on page 3-3 (EN).
^ Displays the SETTING menu.
|. iil
For details, see "Selecting an Item in the
SETTING Menu " on page 2-2 (EN).
SETTING
Checks the alarm signals and log file of
the local ALARM IN port.
For details, see "Checking the Alarm Signals
and Log File of the ALARM IN Port" on page
3-8 (EN).
CAMERA
SELECT
Switches the pictures of the local site.
For details, see "Switching the Pictures" on
page 3-5 (EN).
KD
CAMERA
CONTROL
Operates a local site camera.
rn [ ^ 1
Adjust the zoom.
( 4 ] [ 6 ] Adjust the focus.
Adjust the iris.
[IT] Move the camt/ra angle in
the selected direction.
REMOTE site icons
Disables camera auto scan temporarily.
For details, see "Stopping the Camera Auto
Scan Temporarily" on page 3-5 (EN).
Each time you select ENTER, the line or
headset volume setting is changed.
For details, see "Changing the Head.set and
Line Volume of the Remote Site
"
on page 3-4
(EN).
Each time you press ENTER, the
microphone input level setting is changed.
For details, see " Changing the Input Level of
the Microphone of the Remote Site" on page
3-4 (EN).
Each time you select ENTER, the picture
quality setting is changed.
For details, see "Changing the Quality of the
Picture Sent from a Remote Site
"
on page 3-6
(EN).
Checks the alarm signals and log file of
the remote ALARM IN port.
For details, see "Checking the Alarm Signals
and Log File of the ALARM IN Port" on page
3-8 (EN).
Switches the pictures of the remote site.
For details, see "Swilehing the Picture.s
page 3 5 (EN).
Operates a remote site camera.
The operation is the same as the operation
described for the CAMERA CONTROL
icon of LOCAL position.
For details, sec "Operating the Camera" on
page 3-6 (EN).
AUTO SCAN
PAUSE
<|))
LINE
V
MIC
PICTURE
MODE
CAMERA
SELECT
KZ3
CAMERA
CONTROL