Sony RSE-500 Operating Instructions Manual page 31

You can register up to 128 calling parties with
permission to be connected.
This function may not be worked properly depending
on types of switchboards.
Registering Your Calling Party
information
1
Select 7. LIST (RECEIVE) from the SETTING
menu.
The LIST (RECEIVE) menu appears.
To move from page to page on the LIST
(RECEIVE) menu
Move the cursor to <♦> using Each time you
press ENTER, the next LIST (RECEIVE) menu is
displayed.
Move the cursor to <♦> using •#. Each time you
press ENTER, the previous LIST (RECEIVE)
menu is displayed.
2
Select the list number to register the calling party
using ♦ or ♦, then press ENTER.
The following screen appears.
Move the cursor to <OK> using then press
ENTER.
The following screen appears.
SITE NAME:
OFFICE C
NO ;
Iffl*********************]
10123456769 BS
; <CflNCEL> <0K>
i__
5
Enter the telephone number using ♦ or 4', then press
ENTER one by one.
The selected numbers are entered in the telephone
number box.
* A telephone number can be up to 22 digits.
• An asterisk is displayed where nothing is entered.
•When you connect at 2B transmission rate, enter
the telephone number for B1-channel.
0
Move the cursor to <OK> using ♦, then press
ENTER.
The setting is registered and the LIST (RECEIVE)
menu appears.
SITE NOME:
[ * * * * *
*********1
<tlt>
KOBOl
0123456789
OBCDEFGHIJKLMNOP
ORSTUUWXYZ
abcdefghijkimnop
g rstuvwxyz
I " ttsy.s.'
()*+,-. ; : i
< = >?@[\"_] ( )~ + x/\©
5P B5
<C0NCEL> <0K>
Press ♦ and select the site name using > or
then
press ENTER character by character.
The selected characters are entered in the site name
box.
•The site name can be up to 20 characters long.
• Select SP for spaces.
•An asterisk is displayed where nothing is entered.