Memory Bank Operation - Yaesu FT-7800R Operating Manual

Dual band fm transceiver
Hide thumbs Also See for FT-7800R:
Table of Contents

Advertisement

M
EMORY
R
EGULAR
store, the press the [ BAND ( SET )] key momentarily to
move on to the next character. Letters, numbers, and
symbols are available for storage.
5. Again rotate the DIAL knob to select the desired letter,
number, or symbol, then press the [ BAND ( SET )] key
momentarily to move on to the next character's slot. If
you make a mistake, press the microphone's [ DWN ] button to move back to the previous
character's slot, then re-select the correct letter, number, or symbol.
6. Repeat the above step to program the remaining letters,
numbers, or symbols of the desired label. A total of six
characters may be used in the creation of a label.
7. When you have completed the creation of the label, press the [ BAND ( SET )] key mo-
mentarily to save the label, then press and hold in the [ BAND ( SET )] key momentarily
for 1/2 second to normal operation.
8. When recall the Home channel which is appended an alpha-numeric "Tag" (label), press
the microphone's [ B ] key momentarily to switch the
Home channel display between the "Frequency" format
and "Alpha-numeric Tag" format.
Menu #16 (HM/REV) allows configuration of the way you can access the "HOME"
channel. See page 70.

Memory Bank Operation

Memory Bank Assignment
1. Recall the memory channel to be assigned to a Memory Bank. Memory channels L1/U1
~ L50/U50 (band/scanning limit memories) may not be assigned to a Memory Bank.
2. Press and hold in the [ SCAN ( SEL )] key for 1/2 sec-
ond, then rotate the DIAL knob to select the Memory
Bank you want as the Memory Bank for this channel
("BANK1" ~ "BANK20" ).
3. Press and hold in the [ V/M ( MW )] key
for 1/2 second to lock in the selected
M e m o r y B a n k , t h e n p r e s s t h e
[ V/M ( MW )] key momentarily to copy
the memory channel data into the
Memory Bank.
1) You may assign one memory channel into several Memory Banks.
2) The PMS memory channels (L1/U1 through L50/U50) may not be assigned to
a Memory Bank.
36
O
PERATION
M
EMORY
C
O
HANNEL
PERATION
Memory Channel
CH 000 145.000 MHz
CH 001 145.500 MHz
CH 002 435.000 MHz
CH 003 435.500 MHz
CH 004 145.800 MHz
CH 005 436.000 MHz
CH 006 128.800 MHz
CH 997 145.620 MHz
CH 998 436.780 MHz
CH 999 128.600 MHz
FT-7800R O
Memory Bank "1"
144 MHz Amateur Band Channels
Memory Bank "2"
430 MHz Amateur Band Channels
Memory Bank "3"
All Amateur Band Channels
Memory Bank "4"
Club Channels
Memory Bank "5"
Air Band Channels
M

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents