Advanced Operation; Lock Feature; Keyboard Beeper - Yaesu FT-7800R Operating Manual

Dual band fm transceiver
Hide thumbs Also See for FT-7800R:
Table of Contents

Advertisement

In order to prevent accidental frequency change or inadvertent transmission, various aspects
of the FT-7800R's keys may be locked out. The possible lockout combinations are:
LK KEY: Just the front panel keys and microphone buttons are locked out (except for
the PTT switch).
LK DIAL: Just the front panel DIAL is locked out.
LK K+D: Both the DIAL and keys (include microphone buttons) are locked out.
LK PTT: The PTT switch is locked (TX not possible).
LK P+K: Both the keys (include microphone buttons) and PTT switch are locked out.
LK P+D: Both the PTT switch and DIAL are locked out.
LK ALL: All of the above are locked out.
LK OFF: The Lock feature is disabled.
To lock out some or all of the keys:
1. Press and hold in the [ BAND ( SET )] key for 1/2 second to enter the Set (Menu) mode.
2. Rotate the DIAL knob to select Menu #21 (LOCK).
3. Press the [ BAND ( SET )] key momentarily, then rotate
the DIAL knob to choose between one of the locking
schemes as outline above.
4. When you have made your selection, press the
[ BAND ( SET )] key momentarily to save the new set-
ting, then press and hold in the [ BAND ( SET )] key for
1/2 second to exit to normal operation.
5. To unlock the panel switches and DIAL knobs, select
"LK OFF" in step 3 above.
A key/button beeper provides useful audible feedback whenever a key/button is pressed.
If you want to turn the beep off:
1. Press and hold in the [ BAND ( SET )] key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select Menu #5 (BEEP).
3. Press the [ BAND ( SET )] key momentarily, then rotate
the DIAL knob to change the setting to "OFF."
4. Press the [ BAND ( SET )] key momentarily to save the
new setting, then press and hold in the [ BAND ( SET )]
key for 1/2 second to exit to normal operation.
5. To turn the beep back on again, select "KEY" or "KEY+SC (default)" in step 3 above.
KEY:
The beeper sounds when you press any key.
KEY+SC: The beeper sounds when you press a key, or when the scanner stops.
FT-7800R O
A
DVANCED
L
F
OCK
EATURE
K
EYBOARD
M
O
B
EEPER
PERATION
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents