Yaesu FT-7800R Operating Manual page 15

F P C & S
RONT ANEL ONTROLS WITCHES
[ LOW ( ACC )] Key
Press this key momentarily to select the transmitter power output level ("LOW," "MID2,"
"MID1," or "HIGH").
Press and hold in this key for 1/2 second to recall the Weather Broadcast Channels.
You can program the alternate (press and hold in) function of this key to another func-
tion, if desired. See page 60 for details.
[ BAND ( SET )] Key
While operating on the VFO mode, press this key momentarily to toggle the operating
band as follows:
144 MHz ......
144 MHz 250 MHz 350 MHz 430 MHz 850 MHz
In the Memory mode, press this key momentarily to activate the "Memory Tune" func-
tion.
Press and hold in this key for 1/2 second to enter the Set ("Menu") mode.
[ V/M ( MW )] Key
Press this key momentarily to switch the frequency control among the VFO, Memory
System, and Home channel.
Press and hold in this key for 1/2 second to transfer the VFO contents into a Memory
register.
[ SCAN ( SEL )] Key
Press this key momentarily to activate the Scanner.
Press and hold in this key for 1/2 second to select the scan mode.
[ S.SCH ( ARTS )] Keys
Press this key momentarily to activate the Smart Search feature.
Press and hold in this key for 1/2 second to activate the ARTS feature.
DIAL knob
This 20-position detented rotary switch is the tuning dial for the transceiver. It is used
for most tuning, memory selection, and function setting tasks on the transceiver.
PWR ( ) Switch
Press and hold in this switch for 1/2 second to toggle the transceiver's power on and off.
[ ] Key
Press this key momentarily to activate the Internet Connection Feature.
Press and hold in this key for 1/2 second to indicate access number of the Internet
Connection Feature.
FT-7800R O M 13