Working Conditions - Desisti POLYMNIA Instruction Manual

Ground
Neutral
Live
In case the colors of the cores do not correspond to the colors of the connection points on your plug, please proceed as
follows:
- the green or green and yellow core must be connected to the connection point marked with the letter E or with the
symbol or colored in green or in green - yellow;
- the blue (or white) core must be connected to the connection point marked with the letter N or colored in black;
- the brown (or black) core must be connected to the connection point marked with the letter L or colored in red.

Working conditions

Working Position
Ambient temperature, ta at the place of installation and
storage
Humidity at the place of installation and storage
Minimum distances from inflammable surfaces
The luminaire should never be OPERATED close to inflammable materials. The ones indicated in the above table are the
minimum distances recommended. Other requirements for safe use are:
A. Do not cover the apertures of the detachable driver housing. They are essential for correct ventilation
B. Use only original accessories and spares from De Sisti Lighting.
C. Before hanging the luminaire ensure that the suspension point (or the stand) is properly rated to accept the luminaire
weight.
D. A suitable secondary safety suspension device (safety cable, chain or equivalent) must be fitted between the suspen-
sion point and the eyelet at the front of the body.
ILT ITALY srl
Via Cancelliera, 10/a
00041 Albano Laziale (Rome) Italy
tel. +39 06-902901 fax +39 06-90231051
www.desisti.it
Europe
Green & yellow
Blue
Brown
This Manual is applicable to the De Sisti – Storaro The Muses of Light - POLYMNIA
America
Green or green & yellow
White
Black
Lighting fixture: max. tilting ±90° from horizontal
Minimum 10°C, maximum +40°C
25-80% (not condensing)
Top Back
0,4 m. 0,3 m.
Sides Front
0,3 m. 1,5 m.
Revised on March 2021