Firmware Upgrade - Desisti POLYMNIA Instruction Manual

SET 1: 5600K
SET 2: 4300K
SET 3: 3200K
The user then will be allowed to tune the CCT from the "preset value" and the related indicator LED will turn off once the CCT
value will change from the preset.
Important: in Storaro mode the CCT can
be changed only manually, no DMX chan-
nel is activated for CCT tuning.
When in "De Sisti mode" the same buttons can be used to save the current dimming and CCT level to recall it later. To save
the desired values push the related SET 1, SET 2 or SET 3 button for 3 seconds. To recall it simply push the related button.

FIRMWARE UPGRADE

To upgrade the Firmware connect the unit
MICRO USB port to a Microsoft Win-
dows PC with the De Sisti upgrade soft-
ware installed.
To install the software:
Unpack the ZIP file provided by your local reseller or the De Sisti website.
You will unpack:
- DRIVER USB
- BOOTLOADER
ILT ITALY srl
Via Cancelliera, 10/a
00041 Albano Laziale (Rome) Italy
tel. +39 06-902901 fax +39 06-90231051
www.desisti.it
This Manual is applicable to the De Sisti – Storaro The Muses of Light - POLYMNIA Revised on March 2021