Table of Contents
Advertisement
Install the USB drivers en-
tering the proper folder and
launching the .exe inside it.
Then enter the BOOT-
LOADER folder and launch
the exe Bootloader De Sisti
Vx.x.
Then follow these STEPS:
1) With unit con-
nected through
USB push Find
Device.
2) The software will show the USB connected COM Port.
3) Push "Connect CPU".
4) The unit and the
display will enter
into boot mode.
5) Push "Load Hex
file.
6) Enter the folder where you have previously saved the CPU Firmware file and open it. WARNING: The file name
MUST Start with "CPU_xxxxx".
7) Software will
show the log "Hex
file loaded suc-
cessfully.
ILT ITALY srl
Via Cancelliera, 10/a
00041 Albano Laziale (Rome) Italy
tel. +39 06-902901 fax +39 06-90231051
www.desisti.it
This Manual is applicable to the De Sisti – Storaro The Muses of Light - POLYMNIA
Revised on March 2021
Advertisement
Table of Contents
