Setting The Ip Address From The Front Panel - Xerox Phaser 7700 Install Manual

Setting the IP Address From the Front Panel

1. highlighted, press the OK key.
With
Menus
2. Press the Arrow Down key to scroll to the
3. Press the OK key.
4.
Scroll to
TCP/IP Address Menu
5. Press the OK key.
6. Scroll to
TCP/IP Address
7. Press the OK key.
8. By pressing the Arrow Down or Arrow Up key, scroll to the correct number for the
first digit of the address. Press the OK key to accept that digit.
9. Repeat step 8 for each remaining digit.
10. Scroll to
TCP/IP Network Mask
11. By pressing the Arrow Down or Arrow Up key, scroll to the correct number for the
first digit of the address. Press the OK key to accept that digit.
12.
Repeat step 11 for each remaining digit.
13.
Scroll to
TCP/IP Gateway
14. Scroll to the correct number for the first digit of the address by pressing the Arrow Up
or Arrow Down key. Press the OK key to accept that digit.
15. Repeat step 14 for each remaining digit.
16.
To exit the menu system, scroll to
Networking Setup Guide
Network Setup
by pressing the Arrow Down key.
by pressing the Arrow Up or Arrow Down key.
by pressing the Arrow Up or Arrow Down key.
by pressing the Arrow Up or Arrow Down key.
and press the OK key.
Exit
Setting the Printer's IP Address
Menu.
15