Table of Contents
Advertisement
PART II: INSTALLATION
MOUNTING AND CONNECTING THE BURNER
Packing
The burners are despatched in wooden crates whose dimensions are:
1672mm x 1072mm x 1016mm (L x P x H)
Packing cases of this type are affected by humidity and are not suitable for stacking.
The following are placed in each packing case:
burner with gas train;
ceramic fibre plait to be inserted between the burner and the boiler;
envelope containing this manual.
To get rid of the burner's packing, follow the procedures laid down by current laws on disposal
of materials.
Handling the burner
ATTENTION! The handling operations must be carried out by specialised and trained personnel. If these
operations are not carried out correctly, the residual risk for the burner to overturn and fall down still persists.
To move the burner, use means suitable to support its weight (see paragraph "Technical specifications").
The unpacked burner must be lifted and moved only by means of a fork lift truck.
The burner is mounted on a stirrup provided for handling the burner by means of a fork lift truck: the forks must be inserted into the A
anb B ways. Remove the stirrup only once the burner is installed to the boiler.
PART II: INSTALLATION
A
12
H
L
P
B
Advertisement
Table of Contents
