Xerox Phaser 8500N User Manual page 108

3.
Within 10 seconds after turning off the printer, select
on the control panel.
Note: If you receive a
panel, the printer is not ready to be moved. If the printhead is not locked, the printer can be
damaged during shipment.
4. Verify that the flag in the exit tray is in the raised position. When the flag is raised, the
printhead is locked.
5. Wait for the printer to complete the cool-down period for the ink to solidify. The fan shuts
down when it is cool enough to move.
Caution: If you turn off the printer but do not select
on the control panel, the fan does not run, so you must wait longer for the ink to solidify.
Wait at least 30 minutes for the printer to cool completely before moving or packing it.
Power Down Error-Head not Parked
Phaser® 8500/8550 Color Printer
5-17
Moving and Repacking the Printer
Shut Down for Moving Printer
message at the control
8500-099
Shut Down for Moving Printer