Tektronix Phaser 840 Install Manual page 14

Getting Set Up
8
Phaser 840 Color Printer
2.
Allow at least 10 cm (4 in.) clearance on the right and rear sides of the
printer for proper ventilation and to prevent the printer from
overheating.
C
A U T I O N
If the printer isn't adequately ventilated, some of the printer's internal parts may
be damaged or the printer may not operate properly. Avoid leaving loose
papers or packing materials next to the vent on the right side of the printer; they
may cause the printer to overheat.
3.
Handle the printer carefully when moving it. Remove the media tray
for easier handling. Remove the printer from the box and place it in the
selected location.
10 cm
(4 in.)
10 cm (4 in.)
0389-06
36 kg
79 lb.
0389-37