Network Protocols; Determining Enabled Protocols; Disabling And Enabling Protocols - Xerox Phaser 7700 Install Manual

Xerox phaser 7700: install guide

Hide thumbs Also See for Phaser 7700:

Table of Contents

Network Protocols

All protocols can be enabled and disabled. The Configuration Page displays which

protocols are enabled. If a protocol is enabled, the field for that protocol lists the current

parameters. If the protocol is disabled, the field for that protocol contains an entry reading

Off.

After your network configuration is complete, you may want to disable protocols that you

are not using to avoid unnecessary network traffic. There are four ways to disable

protocols:

Use the printer's front panel — see page 33.

Using CentreWare DP — In NetWare environments, you can use CentreWare DP. See

the CentreWare DP User Guide.

Using CentreWare IS — see page 33.

With a TCP/IP connection and a World Wide Web browser, you can use CentreWare

IS.

Using PostScript Utility Files

Send the appropriate PostScript utility file to the printer. See the ReadMe files on the

printer's CD-ROM. The PC ReadMe file is in the UTILS directory; the Macintosh

ReadMe file is in the Network Utilities folder.

You can enable protocols by the same procedure. Just select the command to enable a

protocol rather than disable it.

Phaser 7700 Color Printer

Table of Contents