Setting The Ip Address Using Centreware Is; Domain Name Service (Dns) - Xerox Phaser 7700 Install Manual

Setting the IP Address Using CentreWare IS

After setting the printer's IP address by another method, you can perform the rest of the
TCP/IP configuration using CentreWare IS.
1.
Connect to the printer via CentreWare IS (see page 24).
2. On the right side of the printer's main CentreWare IS page, click Properties.
3. On the left side, under Protocols, click TCP/IP.
Enter your printer's settings and click Save Changes at the bottom of the page.
4.
Note
The changes will not take effect until the printer is reset.

Domain Name Service (DNS)

The printer supports DNS through an embedded DNS stub resolver. The DNS resolver
protocol communicates with one or more DNS servers to request the IP address for a given
host name or the host name for a given IP address.
To use an IP host name for the printer, the system administrator must have already
configured one or more DNS servers and a local DNS domain name space database.
To set up the printer for DNS, supply an IP domain name and up to two DNS name server
IP addresses. There are two ways to set up the printer:
DHCP — See page 16.


TCP/IP — See the next topic, DNS Setup Using CentreWare IS.


Networking Setup Guide
Setting the Printer's IP Address
17