Table of Contents
Advertisement
SUN2000-(3KTL-10KTL)-M1 Series
User Manual
● Since the output of the PV string connected to the SUN2000 cannot be
● During the installation of PV strings and the SUN2000, the positive or negative
Terminal Description
Figure 5-11 Terminal
(1) DC input terminal
Figure 5-12 Correct wiring terminals
Procedure
Step 1 Install the DC input power cables.
Issue 17 (2024-01-12)
NO TICE
grounded, ensure that the PV module output is well insulated to ground.
terminals of PV strings may be short-circuited to ground if the power cable is
not properly installed or routed. In this case, an AC or DC short circuit may
occur and damage the SUN2000. The caused device damage is not covered
under any warranty.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
(2) Battery terminal
50
Advertisement
Table of Contents
