Huawei SUN2000-3KTL-M1 Series User Manual page 54

SUN2000-(3KTL-10KTL)-M1 Series
User Manual
● Avoid scratching the core wire when stripping a cable.
● The cavity formed after the conductor crimp strip of the OT terminal is crimped
● Wrap the wire crimping area with heat shrink tubing or PVC insulation tape.
● When using a heat gun, protect devices from being scorched.
Figure 5-2 Crimping an OT terminal
(1) Cable
(4) OT terminal
Step 2 Connect the PE cable.
Issue 17 (2024-01-12)
NO TICE
must wrap the core wires completely. The core wires must contact the OT
terminal closely.
The heat shrink tubing is used as an example.
Copyright © Huawei Technologies Co., Ltd.
(2) Core
(5) Crimping tool
5 Electrical Connections
(3) Heat shrink tubing
(6) Heat gun
44