Table of Contents
Advertisement
SUN2000-(3KTL-10KTL)-M1 Series
User Manual
● If the built-in Wi-Fi module of the SUN2000 connects to the app, only device commissioning
● If inverters are cascaded without any battery, the main inverter model can be
● If inverters are cascaded with an ESS, M1/M2/M5/MB0 can be cascaded. Each M1 can
● For details about the EMMA networking scenario, see the
For detailed operations on devices in the network, see the following guides:
●
●
●
The off-grid load output port of the Backup Box cannot be directly connected to
the power grid. Otherwise, the Backup Box will be shut down due to overload.
Supported Power Grid Types
The SUN2000 supports TN-S, TN-C, TN-C-S, TT, and IT power grids.
Issue 17 (2024-01-12)
NO TE
can be performed.
SUN2000-(3KTL-10KTL)-M1 Series. The slave inverter model can be SUN2000-(3KTL-10KTL)-
M1 Series, SUN2000-(8KTL-20KTL)-M2, SUN2000-(20KTL-40KTL)-M3,
SUN2000-(5KTL-20KTL)-M0, SUN2000-50KTL/60KTL/65KTL-M0, SUN2000-29.9KTL/36KTL, or
SUN2000-33KTL-A.
connect to a maximum of two ESSs, and each MB0 can connect to a maximum of four ESSs.
In the Smart Dongle networking scenario, a maximum of three inverters and six ESSs can be
connected.
Quick Guide (Three-Phase PV+ESS Scenario + EMMA
NO TE
SUN2000-450W-P Smart PV Optimizer Quick Guide
LUNA2000-(5-30)-S0 User Manual
Backup Box-(B0, B1) Quick Guide
CA UTION
NO TE
● For a PV string connected to an MPPT circuit, the model, quantity, orientation, and tilt
angle of PV modules in the PV string must be the same.
● The voltage of different MPPT circuits must be the same.
● The MPPT voltage must be greater than the lower threshold of the full-load MPPT
range specified in the inverter technical data sheet. Otherwise, the inverter will be
derated, causing the system yield loss.
Copyright © Huawei Technologies Co., Ltd.
Residential Smart PV Solution
Networking).
2 Overview
15
Advertisement
Table of Contents
