Huawei SUN2000-3KTL-M1 Series User Manual page 107

SUN2000-(3KTL-10KTL)-M1 Series
User Manual
Figure 7-15 Setting capacity control parameters
Parameter
Capacity control
Backup power SOC
for peak shaving
(%)
Start date
End dete
Peak power (kW)
Issue 17 (2024-01-12)
Description
1. Before enabling Capacity
control, set Charge from
grid to Enable.
2. Before disabling Charge
from grid, set Capacity
control to Disable.
The value of this parameter
affects the peak shaving
capability. A larger value
indicates stronger peak shaving
capability.
● Set the peak power range
based on the start time and
end time. The peak power is
configured based on
electricity prices in different
time segments. You are
advised to set the peak
power to a low value when
the electricity price is high.
● A maximum of 14 time
segments are allowed.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interaction
Range
● Disable
● Active capacity limit
[0.0, 100.0]
Backup power SOC for
peak shaving > Backup
power SOC (when
BackUp is enabled) >
End-of-discharge SOC
-
[0.000, 1000.000]
97