Page 2
REVISION DATE VERSION DESCRIPTION 2023/8/1 Version 1.0A New Release PPC-090T-EHL User’s Manual IUMPPC090TEHL-01 Ver.1.0A Aug, 2023...
Page 3
Global: www.icop.com.tw USA: www.icoptech.com Japan: www.icop.co.jp Europe: www.icoptech.eu China: www.icop.com.cn For technical support or drivers download, please visit our websites at: https://www.icop.com.tw/resource_entrance This Manual is for the PPC-090T-EHL series. PPC-090T-EHL User’s Manual IUMPPC090TEHL-01 Ver.1.0A Aug, 2023...
Page 4
SAFETY INFORMATION Read these Safety instructions carefully. Please carry the unit with both hands, handle carefully. Make sure the voltage of the power source is correct before connecting the equipment to the power outlet. Do not expose your Panel PC to rain or moisture in order to prevent shock and fire hazard.
1.1 Product Description ICOP Technology Inc. is proudly going to release a brand new Panel PC, which offers fanless design, low power consumption, and IP65 front panel. The PPC-090T-EHL is powered by Intel® Elkhart Lake J6412 processors, and up to 32GB of SO-DIMM DDR4 module that handles processing more efficiently and provides faster performance.
1.3 Inspection standard for TFT-LCD Panel DEFECT TYPE LIMIT Note φ<0.15mm Ignore 0.15mm≦φ≦0.5mm N≦4 SPOT Note1 0.5mm<φ 0.03mm<W≦0.1mm, L≦5mm N≦3 FIBER Note1 VISUAL INTERNAL 1.0mm<W, 1.5mm<L DEFECT φ<0.15mm Ignore POLARIZER 0.15mm≦φ≦0.5mm N≦2 Note1 BUBBLE 0.5mm<φ It’ OK if mura is slight visible through 6%ND filter Mura A Grade B Grade...
Page 11
W: Width[mm]; L: Length[mm]; N: Number; φ: Average Diameter. [ Note 1 ] (a) White / Black Spot (b) Polarizer Bubble [ Note 2 ] Bright dot is defined through 6% transmission ND Filter as following. [ Note 3 ] Display area C Area: Center of display area O Area: Outer of display area...
Page 12
[ Note 4 ] Judge the defect dot and the adjacent dot as following. Allow below (as A, B, C and D status) adjacent defect dots, including bright and dark adjacent dot. And they will be counted 2 defect dots in total quantity. R Defect Dot Adjacent Dot The defects that are not defined above and considered to be problem shall be reviewed...
1.5 Mounting Instruction 1.5.1 VESA Mounting PPC-090T-EHL series support VESA Mount that is an optional for ordering. Please contact your region sales for ordering. Ordering part number: VESA-MT-PPC-EHL-SET 1. Place VESA bracket and VESA-MT-PPC-EHL-SET together. 2. Lock 4 screws and nuts on both of VESA bracket and VESA-MT-PPC-EHL-SET.
Page 15
1.5.2 Panel Mounting PPC-090T-EHL series support clamp mount as below figure and the panel mount clamps are inside the packaging box. Please refer the installation guide as below. Please refer the Section 1.4 to make a cutout hole on your mechanical or frame.
1.6 Ordering Information Product Code LCD Size CPU Series CPU Type 090T 1. Product Code: PPC:Panel PC Series. 2. LCD Size: 090T:9” LCD with Resistive touch screen. 3. CPU Serial: EHL: Intel Elkhart Lake Series. 3. CPU Type: J6: Intel Elkhart Lake J6412.(Standard; Quad Core 10W) PJ6: Intel Elkhart Lake J6412 with PCAP touch.(Standard;...
Page 17
PART NUMBER DESCRIPTION 9" Panel PC w/Intel Elkhart Lake J6412/8GB DRAM PPC-090T-EHL-J6-8G /6U/2*2.5GbE LAN/2S/Resistive Touch 9" Panel PC w/Intel Elkhart Lake J6412/16GB DRAM PPC-090T-EHL-J6-16G /6U/2*2.5GbE LAN/2S/Resistive Touch PPC-090T-EHL-J6-32G 9" Panel PC w/Intel Elkhart Lake J6412/32GB DRAM /6U/2*2.5GbE LAN/2S/Resistive Touch PPC-090T-EHL-PJ6-8G 9"...
LVDS 2.3 Connector Pin Pin # Signal Name Pin # Signal Name Assignments LVDSB_D3- LVDSB_D3+ LVDSB_CLK- LVDSB_CLK+ LVDSB_D2- LVDSB_D2+ Power DC Jack LVDSB_D1- LVDSB_D1+ Pin # Signal Name LVDSB_D0- LVDSB_D0+ +12~24V Power Input NC/DDC_DAT NC/DDC_CLK COM1 (RS232/422/485) LVDSA_D3+ LVDSA_D3- Pin # Signal Name Pin # Signal Name...
2.4 External I/O Overview NOTE: COM1 RS232/422/485 is selected by BIOS setting. Please refer the section, 4.3 to set the function in the BIOS setup. PPC-090T-EHL User’s Manual IUMPPC090TEHL-01 Ver.1.0A Aug, 2023...
External Assignment Power DC Jack (+12~24Vdc Input) HDMI Pin # Signal Name Pin # Signal Name TMDS_Data2+ +12~24Vdc TMDS_Data2_Shield TMDS_Data2- COM1 (RS232/422/485) TMDS_Data1+ (Change mode by BIOS Setup) TMDS_Data1_Shield Signal Signal TMDS_Data1- Pin # Pin # Name Name TMDS_Data0+ DCD1 RXD1 TMDS_Data0_Shield /422TX-...
Page 24
USB 3.1 Pin # Signal Name SSRX- SSRX+ SSTX- SSTX+ PPC-090T-EHL User’s Manual IUMPPC090TEHL-01 Ver.1.0A Aug, 2023...
Hardware Installation PPC-090T-EHL supports various kinds of storages for industrial application, divided into M.2 2242 SATA (M-Key) and 2.5” SATAIII HDD/SSD. 3.1 Installing the M.2 2242/2280 Storage 3.2 Installing the M.2 B-Key (3024) and M.2 M-Key (2230) Modules 3.3 Installing the Micro SIM Card (Must have 3G/4G of M.2 B-Key (3024) Module in advance) PPC-090T-EHL User’s Manual IUMPPC090TEHL-01 Ver.1.0A Aug, 2023...
3.1 Installing the M.2 M-key (2242/2280) Storage PPC-090T-EHL series support M.2 M-key (2242/2280) PCIe Gen. 3 *2 / SATA interface NVME. Please refer the below instructions. [STEP] Remove the 4 screws of right and left side as the image below.
Page 27
Support M.2 2240/2280 storage, which the green area is for 2242 and red area is for 2280. For 2242 or 2280 storage, please use a M2 screw driver to remove the top screw in advance, and then use M4 screw driver to move the bottom screw to the correct position.
Page 28
ICOP offers the standard M2. 2242 SATA storage as below. [SPEC] Standard M.2 2242 form factor 22 x 42 x 3.2 mm [M.2 2242 SATA LIST] Flash Type Capacity Operating Temperature 0℃ ~ +70℃ IM242S-64G-M 64GB 0℃ ~ +70℃ IM242S-128G-M 128GB 0℃...
3.2 Installing the M.2 B-Key (3024) and M.2 E-Key (2230) Modules PPC-090T-EHL series support M.2 B-key (3024) USB3.1/USB2.0 interface and M.2 E-key (2230) USB2.0/PCIe Gen3 *1 interface. Please refer the below instructions. [STEP] Remove the 4 screws of right and left side as the image below.
Page 30
Remove the screw and plug the M.2 B-Key (3024) and M.2 E-Key (2230) modules on the slots, and then lock them up. Take the rear cover back and lock 4 screws. PPC-090T-EHL User’s Manual IUMPPC090TEHL-01 Ver.1.0A Aug, 2023...
3.3 Installing the Micro SIM Card (Must have 3G/4G of M.2 B-key (3024) Module in advance) PPC-090T-EHL series support Micro SIM Card for 3G/4G of M.2 B-key (3024) USB3.1/USB2.0 module [STEP] Please refer the section, 3.2 to install 3G/4G of M.2 B-key (3024) Module in advance.
4.1 Operating System Support and Drivers The PPC-090T-EHL provides the Win10 and Win11 drivers. Please get the drivers from ICOP technical support URL: https://www.icop.com.tw/resource_entrance For Linux, most Linux distributions support Intel® Elkhart Lake Processor and user can install Linux upon PPC-090T-EHL directly. Please contact your region sales for technical support if you have any question.
4.2 BIOS Hot Key After power on, it supports BIOS hot key as below. Press < Del > to enter the AMI BIOS setup Press < F7 > to enter Popup Menu PPC-090T-EHL User’s Manual IUMPPC090TEHL-01 Ver.1.0A Aug, 2023...
4.3 BIOS COM1 Setting (RS232/422/485) COM1 can be set to be RS232/422/485 function. Please refer the instruction as below. (1) In the BIOS Setup, please go to “Advanced” and “Super IO Configuration”. (2) Go to “Serial Port 1 Configuration”. PPC-090T-EHL User’s Manual IUMPPC090TEHL-01 Ver.1.0A Aug, 2023...
Page 36
(3) Go to Transmission Mode and set RS232/422/485 function. (4) After setting, please press “F4” key to save & exit. PPC-090T-EHL User’s Manual IUMPPC090TEHL-01 Ver.1.0A Aug, 2023...
4.4 BIOS COM2 Setting (Change Settings) COM2 can be changed settings as below. (1) In the BIOS Setup, please go to “Advanced” and “Super IO Configuration”. (2) Go to “Serial Port 2 Configuration”. PPC-090T-EHL User’s Manual IUMPPC090TEHL-01 Ver.1.0A Aug, 2023...
Page 38
(3) Go to “Change Settings” and set IO address and IRQ if you want. (4) After setting, please press “F4” key to save & exit. PPC-090T-EHL User’s Manual IUMPPC090TEHL-01 Ver.1.0A Aug, 2023...
4.5 BIOS AT Mode Setting (Support Auto-Power On Function) PPC-090T-EHL supports “Auto-Power On function”, user doesn’t need to press “power button” for system power on and just needs to plug power source input and system will be power on automatically. (1) In the BIOS Setup, please go to “Chipset”...
Page 40
(3) After setting, please press “F4” key to save & exit. Note: After system shut down by operating system, PPC-090T-EHL will be power-off. For next booting up, user just needs to re-plug power adapter or power reset again, while system will be boot-up automatically. PPC-090T-EHL User’s Manual IUMPPC090TEHL-01 Ver.1.0A Aug, 2023...
4.6 BIOS Serial Port Console Redirection PPC-090T-EHL supports Serial Port Console Redirection as below. (1) Go to “Advanced” and “Serial Port Console Redirection”. (2) Set “Console Redirection” to be “Enabled”. PPC-090T-EHL User’s Manual IUMPPC090TEHL-01 Ver.1.0A Aug, 2023...
Page 42
(3) Go to “Console Redirection Settings”. (4) Set “Terminal Type” to “VT100+”. Emulation: [ANSI]: Extended ASCII char set; [VT100]: ASCII char set; [VT100+]: Extended VT100 to support color, function keys, etc.; [VT-UTF8]: Uses UTF8 encoding to map Unicode chars onto 1 or more Bytes.