Channel Setting (Default: Channel 1); Mute/Unmute Mic (Default: Unmute) - Sena NAUTITALK N2R Manual

5 MESH INTERCOM

5.3 Channel Setting (Default: channel 1)

If the Mesh communication experiences interference because other
groups are also using the same channel, you can change to one of the
other eight channels.
1. Double tap the Mesh Intercom Button.
2. Navigate forward or backward by tapping the (+) Button or the (-)
Button.
(1 2 •••
3. Tap the Multi-function Button to save the channel.
Note:
• Channel Setting always starts with channel 1.
• To automatically save a channel after setting it, wait approximately
10 seconds before pressing any other buttons.
• The channel will be saved even if you turn off the NAUTITALK N2R.
• The Sena Marine App can also be used to change the channel.

5.4 Mute/Unmute Mic (Default: Unmute)

Use the MIC Button to mute/unmute the microphone in any Mesh
channel.
TAP
2x
8 9 Exit
TAP
or
1x
TAP
1x
TAP
1x
" Channel setting, 1"
1 •••)
TAP
1x
" Channel is set,
channel #"
NAUTITALK N2R Yaching Headsets™ | 14
"#"