Printing Custom Size Paper - Xerox Phaser 4510 User Manual

5. On the control panel, press the OK button if
or select the paper type:
a. Select
Change setup
b.
Select Index Card
6.
In the printer driver, select the appropriate tray or paper type.

Printing Custom Size Paper

In addition to the wide variety of standard paper sizes that you can use for printing, you can
also print on custom size paper from any tray. The custom size paper must be within the
following dimensions.
Tray 1
1-Sided Printing
Short 76 – 216 mm
Edge
3.0 – 8.5 in.
Long 127 – 356 mm
Edge
5.0 – 14.0 in.
2-Sided Printing
Short 89 – 216 mm
Edge
3.5 – 8.5 in.
Long 140 – 356 mm
Edge
5.5 – 14.0 in.
Index Card
, and then press the OK button.
, and then press the OK button.
Input
Trays 2-4
98 – 216 mm
3.9 – 8.5 in.
148 – 356 mm
5.8 – 14.0 in.
98 – 216 mm
3.9 – 8.5 in.
148 – 356 mm
5.8 – 14.0 in.
Phaser® 4510 Laser Printer
3-43
Printing on Specialty Media
is displayed as the current setup,
Output
500-Sheet
Standard Tray Stacker
76 – 216 mm 89 – 216 mm
3.0 – 8.5 in. 3.5 – 8.5 in.
127 – 356 mm 140 – 356 mm
5.0 – 14.0 in. 5.5 – 14.0 in.
Same as Input Same as Input
Same as Input Same as Input