Creating Custom Paper Types - Xerox Phaser 4510 User Manual

7. If you selected
New Custom Size
a. For
Short Edge
edge, and then press the OK button.
b.
For Long Edge , use the Up Arrow and Down Arrow buttons to specify the long
edge, and then press the OK button.
c. If the control panel prompts you for the
Down Arrow buttons to select the direction you are feeding the paper into the tray.
Long-Edge Feed
Note: When you define a new custom size, it is stored in the printer so it can be used
again. Up to five custom sizes can be stored in the printer. If you define a new custom size
after five custom sizes have been stored, the new custom size replaces the least recently
used.
8.
Either use the custom size as the document size in the application or select the appropriate
tray as the paper source.

Creating Custom Paper Types

Custom paper types are created in CentreWare IS and appear in the printer driver, control
panel, and CentreWare IS. Use this feature to create your own custom paper type with specific
settings that you can reuse for routine print jobs, for example, monthly reports.
To create custom paper types:
1.
Launch your web browser.
2.
Enter the printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3.
Click Properties.
4.
Select the General folder on the left navigation panel.
5.
Select Custom Paper Types.
6.
Enter or modify the settings, and then click Save Changes at the bottom of the page.
Note: For more information about creating custom paper types, click the Help button on the
Properties tab to view the online help.
, select the custom width and height:
, use the Up Arrow and Down Arrow buttons to specify the short
Paper Orientation
4510-114
Phaser® 4510 Laser Printer
3-45
Printing on Specialty Media
, use the Up Arrow and
4510-113
Short-Edge Feed