Windows 2000 Or Later; Macintosh Os X, Version 10.3 And Higher - Xerox Phaser 4510 User Manual

Windows 2000 or Later

To install the printer driver from the Software and Documentation CD-ROM:
1.
Insert the CD-ROM into the computer's CD-ROM drive. If the installer does not launch,
do the following:
a.
Click Start, and then click Run.
b. In the Run window, type: <CD drive>:\INSTALL.EXE.
2.
Select your desired language from the list.
3. Select Install Printer Driver.
4. Select the installation method you want to use, and then follow the onscreen instructions.
See also:
Advanced Features Guide at
Online Support Assistant at

Macintosh OS X, Version 10.3 and Higher

Set up your printer using Bonjour (Rendezvous), create a desktop USB connection, or use an
LPD/LPR connection for Macintosh OS X, version 10.3 and higher.
Macintosh OS X, Version 10.3
Bonjour (Rendezvous) Connection
To install the printer driver from the Software and Documentation CD-ROM:
1. Insert the CD-ROM into the CD-ROM drive and select the VISE installer to install the
printer software.
2. When installation is complete, open the Printer Setup Utility for Mac OS X, version
10.3.x.
Note: To locate utilities on the Macintosh hard drive, open the Applications folder, and
then open the Utilities folder.
3. Confirm that the first drop-down menu is set to Bonjour (Rendezvous).
4. Select the printer in the window.
5. Select Xerox from the list of manufacturers in the lower drop-down menu.
6. Select the appropriate printer model from the list of available devices.
7. Click the Add button.
See also:
Advanced Features Guide at
Online Support Assistant at
www.xerox.com/office/4510support
www.xerox.com/office/4510support
www.xerox.com/office/4510support
www.xerox.com/office/4510support
Phaser® 4510 Laser Printer
2-10
Installing the Printer Drivers